banners
preparing to print
1.
Pull out the In tray.
2.
Slide out both paper guides and remove all paper from the tray.
3.
Raise the Out tray.
4.
Select up to 20 sheets of banner paper. Remove and discard any
perforated strips.
5.
Place the banner paper in the In tray with the unattached edge of the
paper facing the printer.
6.
Slide the paper guides snugly against the banner paper.
7.
Push in the In tray. Leave the Out tray up.
printing banners
1.
Open the file you want to print.
45
2.
Follow one of these paths to select your print options, depending on the
software program you are using:
• Click
File
>
, then select
Properties
–or–
• Click
File
>
Print Setup
, then select
Properties
–or–
• Click
File
>
>
Setup
, then select
Properties
.
The printer properties box appears with Setup, Features, and Advanced
tab options.
3.
Select the
Setup
tab, then choose the following:
•
Banner Printing
: Select this box
• Paper Type
:
hp banner paper
•
Print Quality
:
Normal
•
Paper Size
:
Banner [A4 (210 x 297 mm)]
or
Banner [Letter (8.5 x 11 in)]
4.
Select the
Features
tab, then choose the following:
•
Orientation
: Appropriate orientation
•
Two-Sided Printing
: Unchecked
•
Copies
: Up to 20
5.
Select the
Advanced
tab if you wish to make optional adjustments to ink
volume, color, drying time, or print speed (Low Memory Mode).
6.
Click
OK
to return to the Print or Print Setup screen.
7.
Click
OK
to print.
When you select
Banner Printing
, the paper type is set to
hp banner
paper
and the paper size is set to
Banner
automatically.
46
printing guidelines
The
Release Notes
describe problems that may occur when you print banners
using some software programs. Click
Start
>
Programs
>
hp deskjet series
>
Release Notes
to view this information.
For best results use hp products.
47